Galvanostat Sensor Interface with NFC Forum Type 2 Tag IC – SIC4340
$3.8935
Type: RFID IC
Packing: Retail Package
PCODE: P40CVQK4P20UT4010C2
Minimum Order Quantity: 100 psc
Shipping: Approximately 30-45 days From Silicon Craft Technology, Bangkok, Thailand
Please note: This product is sold in minimum order quantities. Orders must meet the required MOQ to proceed. For bulk order, please direct contact us.
200 in stock
SIC4340
Galvanostat Sensor Interface Chip
DOWNLOAD FACTSHEETSIC4340 is a 236-byte NFC tag IC for resistive/capacitive sensor interface which can apply for chemical sensor, light sensor etc. The SIC4340 consists of an NFC Analog-Front-End circuit supporting ISO/IEC 14443 A, a selectable 5-to-10 bit resolution sigma-delta ADC, an on-chip regulator, a sensor interface circuit, a temperature compensate voltage reference, a control register page and an EEPROM. The SIC4340 is designed to get sensor’s voltage response at specific time after biasing. The sensor can be resistive, capacitive or combination of them.
Highlight Features
- Programmable Current Source
- Built-In ADC
- Selectable Post Processing Average
- Adjustable Conversion Starting Point to Avoid
-
Uplink to Ensure Power Stability
-
Configurable Built-In Voltage Buffer for High-Impedance Sensor
-
-
Adjustable Sensor Biasing Frequency for Supporting Wide Capacitance-Range Sensor
-
Adjustable Sampling Point and Warm Up Clock
| Product Attributes | Description |
|---|---|
| Specification | SIC4340 |
| RFID Features | |
| Working Principle | Chip excites sensor with current, then measures the changes in sensor through voltage |
| Communication Interface | NFC Forum Type 2 Tag ISO/IEC 14443 A |
| Power Management | RF On-chip regulator 1.9 V |
| Number of Channels | 3 I/O 3 channels – configurable |
| Current Source | |
| Bias Wave Form | 1) DC 2) Square wave at selectable frequency 300Hz – 50kHz |
| Bias Current Range | Range 0: 1 – 63 μA Range 1: 8 – 504 μA |
| Bias Current Resolution | Range 0: 1 μA /Step Range 1: 8 μA /Step |
| Bias Current Accuracy | Range 0: ± 0.5 μA /Step Range 1: ± 4 μA /Step |
| Analog Input | |
| Input Impedance
|
Input buffer is enabled: > 10 MΩ Input buffer is disabled: 18 – 42 kΩ |
| Measured Voltage Range
|
Input buffer is enabled: 0.2 V to +1.2 V Input buffer is disabled: 0 V to +1.2 V |
| Measured Accuracy | ± 2.5 mV |
| Data Conversion Rate | 10 sps |
| Memory | |
| User Memory | 144 bytes |
| Erase/Write Cycles | 100,000 times |
| Data Retention | 10 years at 70°C |
| Others | |
| Compatible Analysis Techniques | Electrical condutivity (EC) |
| Available Form Factor | QFN 3×3 – 16 leads, Sawn Wafer with Bump |
Applications
- Industrial Sensor
- Resistive Sensing
- Capacitive Sensing
- Temperature Monitoring
- Humidity Detection
- Force/Pressure Sensing
- Gas Sensing
- Etc.
- Food & Beverage Industry
- Water TDS Measurement
- Water Salinity Testing
- Food Spoilage Detection
- Etc.
- Agriculture/ Environment
- EC (Electrical Conductivity)
- Etc.
DEVELOPMENT KIT
Electrical Conductivity Sensor Interface Chip
SUPPORT MATERIALS
- Demonstration Software : iOS, Android application
- Reference PCB design and schematic diagram
- Reference antenna design
Related products
Biosensor Sensor Interface Chip
Potentiostat Sensor Interface with NFC Forum Type 2 Tag IC – SIC4341
NFC Tag IC for Web Authentication
Biosensor Sensor Interface Chip
NEW
ISO/IEC 15693 Tag IC
Sensor Interface Products
Voltage Sensor Interface with NFC Forum Type 2 Tag IC – SIC4343
Electrical Conductivity Sensor Interface Chip